Frame Relay was developed to solve communication problems that other protocols could not: the increased need for higher speeds, an increased need for large bandwidth efficiency, particularly for clumping ("bursty" traffic), an increase in intelligent network devices that lower protocol processing, and the need to connect LANs and WANs. Like X.25, Frame Relay is a packet-switched protocol. But the Frame-Relay process is streamlined. There are significant differences that make Frame Relay a faster, more efficient form of networking. A Frame-Relay network doesn't perform error detection, which results in a considerably smaller amount of overhead and faster processing than X.25. Frame Relay is also protocol independent-it accepts data from many different protocols. This data is encapsulated by the Frame-Relay equipment, not the network.

'Today's LANs and computing equipment have the potential to run at much higher speeds and transfer very large quantities of data. With the diversity and complexity of today's networks, management can be a mammoth task if you don't have the proper tools. Each environment is a unique combination of equipment from different vendors. Frame Relay uses a packet-switching technology, similar to X.25, but is more efficient. As a result, it can make your networking quicker, simpler, and less costly.

Frame Relay sends information in packets called frames through a shared Frame-Relay network. Each frame contains all the information necessary to route it to the correct destination. So in effect, each endpoint can communicate with many destinations over one access link to the network. And instead of being allocated a fixed amount of bandwidth, Frame-Relay services offer a CIR (committed information rate) at which data is transmitted. But if traffic and your service agreement allow, data can burst above your committed rate. Since Frame Relay has a low overhead, it's a perfect fit for today's complex networks. You get several clear benefits: First, multiple logical connections can be sent over a single physical connection, reducing your internetworking costs. By reducing the amount of processing required, you get improved performance and response time. And because Frame Relay uses a simple link layer protocol, your equipment usually requires only software changes or simple hardware modifications, so you don't

Definition 1. - The T-carrier system, introduced by the Bell system in the US in the 1960's, was the first successful system that supported digitalised voice transmission. The original transmission rate (1.544 Mbps) in the Bergenline T1 line is in common use today in ISP (Internet Service Provider) connections to the Internet

Definition 2. - The T1 (or T-1) carrier is the most commonly used digital line in the United States, Canada, and Japan. In these countries, it carries 24 pulse code modulation (PCM) signals using time-division multiplexing (TDM) at an overall rate of 1.544 million bits per second (Mbps). T1 lines use copper wire and span distances within and between major metropolitan areas. A T1 Outstate System has been developed for longer distances between cities.

Definition 3. - A high-speed digital connection capable of transmitting data at a rate of approximately 1.5 million bits per second. A T1 line is typically used by small and medium-sized companies with heavy network traffic. It is large enough to send and receive very large text files, graphics, sounds, and databases instantaneously, and is the fastest speed commonly used to connect networks to the Internet. Sometimes referred to as a leased line, a T1 is basically too large and too expensive for individual home use.

Definition 4. - A type of high speed Internet connection that provides a great deal of bandwidth. Many businesses lease T1 lines to connect to the Internet, but because they are expensive and offer more bandwidth than most small businesses and homes need, they are not realistic solutions for small and low-demand Internet users.

Is a T1 connection better than a DSL connection? A more appropriate questions might be "Is a T1 connection MORE APPROPRIATE than a DSL connections. A T1 connection and DSL connection both offer bandwidth at high speed but have two factors that greatly differentiate them from one another. Those factors are price and realiability. A DSL connection has a low price and is less reliable than a T1 connection. A T1 is much more expensive than a DSL connection but is also much more reliable.

So are you looking for reliablity or price? Reliability becomes critical when customers or employees depend on your connection for immediate responses. If your customers use your connection to access your databases or your server or the internet then reliability of your connection is critical. If your employees depend on your connections because you host the e-mail server in house or host web servers, your connections is considered critical. A critical connection can be viewed much like a life line, without which your business would be negatively impacted. Your monthly savings of having a sub-par connections will not make up for the loss in productivity of your employees or loss of customers when your DSL connections gets bogged down or cut off. To reiterate, ciritcal connections should be supported with a T1 connection. Our Page Keywords Are: Bergenline frame relay Bergenline VPN line Bergenline VPN connection Bergenline VPN service Bergenline VPN provider Bergenline VPN internet Bergenline VPN internet connection Bergenline VPN service provider Bergenline VPN price Bergenline VPN speed Bergenline VPN internet service Bergenline VPN internet access Bergenline fractional VPN Bergenline VPN bandwidth Bergenline VPN internet service provider Bergenline VPN internet provider Bergenline VPN pricing Bergenline VPN internet services Bergenline VPN services. These keywords provide a brief overview of the services offered by ShopforVPN in your city.

Many customers are extremely price sensitive and cannot afford the cost of a T1 which can be as much as 20 times more expensive than a full T1 connection. Residential customers who are most sensitive to price should not consider a T1 connection unless then have a business reason to pay for such a circuit and cannot access DSL service. You may get lucky and find a T1 connections that is low cost which would give you both price and realiability but be careful. Many T1's sold for less than $600 are not truely dedicated circuits and are oversubcribed. In short, if price is your critical factor go with DSL. If reliability is the critical factor purchase a dedicated T1.

Bergenline ShoreTel Dealers | Bergenline Nortel Dealers | Bergenline NEC Dealers | Bergenline Mitel Dealers | Bergenline Cisco Dealers | Bergenline IP PBX Phone System | Bergenline Avaya Dealers